Se
ctio
n
6
- S
erv
ic
e Ke
yp
ad
F
u
n
ctio
n
s
Technical Manual
Section 6 - Service Keypad Functions
The COTI machines are fitted with a service keypad mounted on the rear of the door. It
enables the Operator to carry out specific functions during routine cleaning and
maintenance.
Note: During certain operations e.g. View Counters it is necessary for the operator to utilise
the screen mounted on the front of the door to view the data.
6.1 - Key Functions (COTI Machines)
This keypad enables the following functions:
6.1.1 Key - Not Used
6.1.2 Key 2 - Brewer Open (Freshbrew Models Only)
The Oltre brewers are cycled when using this button.
6.1.3 Key 3 - Rinse/Flush
1. The flush sequence rinses the mixing bowls. Before the sequence begins, the system
waits until the water in the boiler is at the set temperature.
2. Each water valve and the corresponding whipper are switched on in sequence. Once
the flush cycle is complete the machine returns to standby mode.
Note: CoEx® brewers are cycled and rinsed, Oltre brewers are not rinsed.
3. To flush the machine:
Open the front door of the machine.
Caution: Ensure that a suitable container is placed under the dispense position. Keep
hands away from the dispense area whilst the flushing cycle is in operation.
Press and release the Flush or Sanitisation rinse button and the flush sequence
begins.
Empty the waste water container when complete.
6.1.4 Key 4 - Brewer Clean (Freshbrew Models Only)
1. The brewer clean/Brewer rinse button enables the Oltre brewer to be cleaned
independently. In order to guarantee the highest standards of cleanliness the boiler fill
valve is disabled ensuring that the water used is delivered at the optimum
temperature to kill any micro-organisms.
2. The brewer unit is rinsed with hot water and then operated through the complete
brew cycle.
3. Once the cleaning cycle is complete the boiler refills and when the water is at the
required temperature the machine returns to standby mode and is ready to vend.
107
Summary of Contents for COTI
