4096-394
CPI Satcom & Antenna Technologies
1.8M SERIES 1194
6
1.4
MECHANICAL INSTALLATION TOOLS
The hardware supplied with this antenna system is U.S. SAE standard size.
However, the sizes have been chosen to allow use with compatibly sized metric
wrenches as shown in the table below.
HARDWARE SIZE
SAE WRENCH
SIZE
METRIC WRENCH
SIZE
MAXIMUM REC.
TORQUE
5/16" BOLT
1/2"
13 mm
12 ft-lbs
(1.66 kg-m)
1/2" BOLT
3/4"
20 mm
45 ft-lbs
(6.20 kg-m)
3/4" NUT
1-1/8"
28 mm
160 ft-lbs
(22.07 kg-m)
1" BOLT
1-1/2"
38 mm
220 ft-lbs
(30.34 kg-m)
Also recommended for installation:
Inclinometer
Compass
Adjustable Wrench
1.5
FOUNDATION INTERFACE
The required interface from the foundation to the mount is 5" schedule 40 pipe
(5.56" or 14.12 cm O.D.). A suggested in-ground foundation is shown in
Figure 1.