Antenna Specification
How to install?
What’s in the box?
No. of
Elements
Frequency
Range
Antenna
Gain
Beam Width
H/V
Front-Back
Ratio
Impedance
Antenna
Length
4
Reflector x2 Clamp,Screw & Wingnut x2 Bracket x1 Weather-proof F Connector Cover x1
User Manual x1 Folding Element Carrier x1 Plastic Jointing Part x2
16” Coaxial Cable x1
174-230MHz
470-862MHz
10-14dB
H60°
15-20dB
75Ω
800mm
A. Unfold the VHF elements on the upper reflector (at the top side) until they’re locked tight in the plastic support.
B. Joint the two reflectors with the metal clamps, screws & wingnuts.
C. Unfold the element carrier and then tighten the wingnut in the middle.
D. Attach the element carrier to the reflector by using the plastic jointing parts.
E. Use the coaxial cable to connect the F connector from the UHF dipole to the F connector marked “VHF IN” in the
middle of element carrier. Tigten the connectors and use the plastic covers to protect the connectors.
F. Mount the antenna to a pole as high as possible. Connect the coaxial cable from TV to the F connector marked “TO TV”
in the middle of element carrier. Turn the antenna towards the TV tower for best reception..
Clamps
VHF Dipole
,
Screws & Wingnut
Upper Reflector
Element Carrier
Plastic
Jointing Part
D
D
F
E
F
E
B
A
C
VHF In
SKU: 203NA-0001
1Byone Products Inc.
www.1byone.com
VHF & UHF COMBO TV ANTENNA
