![background image](http://html1.mh-extra.com/html/cpi/1194-series/1194-series_assembly-manual_2675003011.webp)
4096-394
CPI Satcom & Antenna Technologies
1.8M SERIES 1194
11
STEP 6:
STEP 7:
A). Rotate azimuth rod or the positioner so
that the hole in the azimuth rod and the hole in the
tab on the side of the positioner
are lined up.
B). Secure the azimuth rod to the positioner
with the 1 / 2” hardware removed in step 1.
C). Lightly tighten all of the azimuth adjustment
hardware at this time.
1 /
2” Hardware
Positioner
Azimuth Rod
A). Remove 1” hardware form the reflector
support tube.
B). Remove 1 / 2” hardware from the elevation
adjustment block and set aside.
1” Hardware
Reflector
Support Tube
1 / 2” Hardware
Elevation Adjustment Block