![background image](http://html1.mh-extra.com/html/cpi/1194-series/1194-series_assembly-manual_2675003012.webp)
4096-394
CPI Satcom & Antenna Technologies
1.8M SERIES 1194
12
STEP 8:
STEP 9:
STEP 10:
A). Loosen 3/4” nuts on elevation rod
to allow movement of the elevation
block.
B). Slide elevation block down the elevation
rod and position the block in between
the small tabs on the positioner so that
the holes in both block and tabs are
aligned.
Elevation Rod
Elevation Block
3/4” Nuts
A). Secure elevation block to Positioner with
1 / 2” hardware set aside in step 7.
Elevation Block
1 / 2” Hardware
A). Place the reflector support tube in between
the large tabs on the positioner as shown.
B). Line up the holes on the tabs with the
holes in the reflector support tube.
C). Secure the support tube to the positioner
with the 1” hardware.
Positioner
1” Hardware
Large Tabs
Reflector Support
Tube