4096-394
CPI Satcom & Antenna Technologies
1.8M SERIES 1194
10
STEP 3:
STEP 4:
STEP 5:
A). Place positioner assembly onto mast
pipe.
B). Orient the positioner assembly
approximately towards the center of
the satellite orbital arc to /- 10°
as shown.
C). Securely tighten [6] canister screws.
D). Tighten [6] lock nuts against canister.
Mast Pipe
To Satellite (/- 10°)
Positioner Assembly
Canister Screws
Lock Nuts
A). Locate azimuth rod (step 1.) and loosen
the 3 / 4” nuts to allow movement of the azimuth
tube.
B). Rem
ove 1 / 2” hardware from azimuth
tube and set aside.
1 / 2” Hardware
Azimuth Tube
3 / 4” Nuts
Azimuth
Rod
A). Locate end hole on canister plate.
B). Position azimuth tube in hole and secure
with 1 / 2” hardware from step 4.
1 / 2” Hardware
Canister Plate
Azimuth Tube