![background image](http://html1.mh-extra.com/html/cpi/1194-series/1194-series_assembly-manual_2675003009.webp)
4096-394
CPI Satcom & Antenna Technologies
1.8M SERIES 1194
9
SECTION II
ANTENNA SYSTEM ASSEMBLY
CAUTION
: During the assembly procedure, the sequence of instructions must be
followed.
Do Not Tighten Any Hardware Until Instructed.
Refer to
the antenna assembly parts list and the following steps.
2.0
ANTENNA ASSEMBLY
STEP 1:
STEP 2:
A). Remove azimuth rod from positioner
assembly.
B). Set azimuth rod and related hardware aside.
Existing Hardware
Azimuth Rod
Positioner Assembly
A). Loosen rotation bolt on top of positioner.
B). Rotate the positioner so that the canister
plate is oriented as shown.
C). Lightly tighten rotation bolt.
90
Rotation
Bolt
Canister
Plate
Positioner