ENGLISH
22
6/2014 - Rev. 00
CLEANING THE CABINET
1) Clean once a week all external parts of the furniture using only a soft, dry cloth.
Never use flammable or abrasive products such as alcohol, acetone or solvents; NO NEVER USE A
WATER JET FOR CLEANING THE CABINET. For glass surfaces use only specific products for cleaning
glasses. It is not advisable to use water as this may cause the accumulation of calcareous deposits on
glass surfaces. SLIDING GLASS: to efficiently maintain the sliding of the sliding glass must be eliminated
during the weekly cleaning, dirt and dust that may have accumulated in the frame. For curved sliding
glass cabinet head is supplied with a lubricator equipment to use when the lids not slide easily. After
cleaning, lubricate the side of the frame where they are tops. It is also advisable to check regularly
that the perimeter borders of glasses are in good condition.
2) Keep perfectly clean internal surfaces. This operation, which includes the melting of the inner walls,
should be done without fail when the thickness of the frost on the walls exceeding 5 mm and may
have a negative effect on the performance of the unit. However, for aesthetic reasons that may be
reflected on the valuation of exposed product, defrost can also perform before the frost reaches this
thickness. Proceed as indicated below:
a) Clear the counter, stocking all products in freezers or refrigerators to maintain appropriate storage
temperature.
b) Initiate defrost putting the cabinet on stand-by.
c) Wait until the interior of the unit has reached room temperature have not been checking that
traces of ice on the walls. Do not try to speed up the operation by removing the ice with metal or
sharp objects to avoid damaging the walls themselves.
d) Carefully clean the inside of the cabinet with warm water and mild soap, then dry thoroughly with
a soft cloth.
e) Having carefully checked that the inner walls are dry (if they are not, let dry over), close the sliding
glass and back on the device.
f) After a couple of hours reloading products. If you want to put the furniture down, disconnect it from
the electrical outlet and leave open sliding covers to prevent the generation of odors. All service not
covered by the above should be performed by authorized service centers for our resellers or by
trained personnel.
REPLACEMENT OF LAMPS
When you need to replace the / s lamp / s, follow closely what is detailed below:
1 - Disconnect power to the entire cabinet
2 - Identify the profile (1) and the plastic diffuser (2):
