5
6/2014 - Rev. 00
DO NOT EXPOSE THE EQUIPMENT TO ATMOSPHERIC AGENTS.
DO NOT USE DIRECT OR INDIRECT WATER JETS ON THE CABINET.
DO NOT TOUCH THE EQUIPMENT WITH DAMP OR WET HANDS OR FEET; DO NOT
USE IT WHILE BAREFOOT.
THE EQUIPMENT IS NOT AIMED TO BE USED BY PERSONS HAVING IMPAIRED
PHYSICAL, SENSORIAL OR MENTAL FACULTIES (CHILDREN INCLUDED), OR BY
PERSONS HAVING POOR EXPERIENCE OR KNOWLEDGE, UNLESS THEY ARE
SUPPORTED BY SOMEBODY IN CHARGE OF THEIR SAFETY OR BY
THE INSTRUCTIONS FOR THE USE OF THE EQUIPMENT.
SURVEILLANCE MUST BE EXERCISED ON CHILDREN IN ORDER FOR THEM NOT TO
PLAY WITH THE EQUIPMENT.
THE POWER CORDS MUST BE PROPERLY SPREAD OUT, SAFE FROM SHOCKS AND
FAR FROM LIQUIDS, WATER AND HEAT SOURCES, AND IN PERFECT CONDITION.
THE USE OF ADAPTOR PLUGS IS FORBIDDEN.
ENSURE THAT THE POWER SUPPLY VOLTAGE MEETS THE DETAILS ON THE RATING
PLATE OF THE CABINET.
THE CABINET MUST BE PROPERLY CONNECTED TO THE EARTHING SYSTEM.
JOBS INVOLVING THE COOLING CYCLE OR THE WIRING SYSTEM MAY ONLY BE
PERFORMED BY QUALIFIED PERSONNEL.
DISCONNECT THE CABINET'S PLUG FROM THE MAINS OUTLET BEFORE ANY JOBS.
DO NOT DAMAGE THE REFRIGERATING CIRCUIT: IT IS FORBIDDENT TO DRILL THE
WALLS OF THE CABINET IN ANY WAY, EITHER INTERNAL OR EXTERNAL (E.G. FOR
THE INSTALLATION OF A SUPERSTRUCTURE, AS THIS COULD BRING DAMAGE TO
THE EVAPORATOR AND CONDENSER TUBES BUILT INTO THE CABINET WALLS.
IF YOU WISH TO STICK ADHESIVE SIGNS ONTO THE CABINET, ONLY USE THIN FOIL.
DO NOT LAY THICK INSULATING LAYERS ON THE EXTERNAL WALLS OF THE
EQUIPMENT AS THIS COULS COMPROMISE CABINET PERFORMANCE.
IN ORDER TO REDUCE FLAMMABILITY-RELATED RISKS, THIS CABINET MAY ONLY
BE INSTALLED BY SUITABLY QUALIFIED PERSONNEL.
ANY OTHER USE NOT EXPLICITLY MENTIONED IN THIS BOOKLET MUST BE
CONSIDERED AS HAZARDOUS.
THE MANUFACTURER DISCLAIMS ALL LIABILITY FOR DAMAGE RESULTING FROM
IMPROPER, INCORRECT OR UNREASONABLE USE.
