![background image](http://html1.mh-extra.com/html/costan/sound-crystal-bt/sound-crystal-bt_user-instructions_2670970021.webp)
ENGLISH
21
6/2014 - Rev. 00
• Load the cabinet as shown in the previous section;
• Never leave open or ajar sliding roofs (fig. 4 of page 10.). We suggest frequent checks all glass sliders
are closed: thus avoid unnecessary energy consumption and unnecessary icing on the walls, while a
better preservation of the products displayed will be obtained. The cabinet SOUND CRYSTAL BT uses
"skin condenser" technology, which allows heat dispersion through the external walls of the cabinet. It
is therefore usual that the outer walls are hot; that prevents the formation of condensation when there
is an elevated environmental moisture.
DESCRIPTION OF CONTROLS
In the front of the cabinet is the controller. All the control and regulation of apparatus pass through
the electronic control unit.
WAITING ON STATE CONTROLLER (STAND-BY)
Pressing the "stand-by" button for 5 seconds it is possible to put it in standby; This turns off the furniture
from the keyboard without having to unplug it.
Changing the operating point
To adjust the setpoint press twice the "SET" key and set pressing the "UP" or "DOWN" keys.
Turning on the lights
The lights turn on automatically when connected to the mains corresponding tab.; the machine has
no light switch.
9. ROUTINE MAINTENANCE
IMPORTANT: make sure there is good visibility conditions in the area in which you work, possibly using
an additional light source. Beware of hot or moving parts, which are marked with the symbol. We
suggest using suitable work gloves.
IMPORTANT: Before performing any work on the electrical system and / or refrigerator
cabinet must be disconnected from the mains power for both circuits (cooling and
lighting)!
UP
DOWN
STAND-BY
SET