26
60T - 280T
COSMOGAS
Figure 6-2 - Levelling feet
Figure 6-1 - Lifting system
6 - INSTALLATION - Setup
6.1 - Setup
To correctly and easily install the appliance, the following steps
must be followed scrupulously.
6.1.1 - Moving the appliance
ATTENTION !!! Use appropriate forklifts for the
type of appliance to move it. Failure to respect this
could cause enormous damages.
Position the appliance in the area chosen for installation,
handling it with the pallet on which it is secured, making sure
to keep it upright without making any sudden movements that
could cause it to overturn.
To free the appliance from the pallet, unscrew the front (part
“C” in figure 5-1) and rear (part “D” in figure 5-1) fixing screws.
6.1.2 - Opening the package
The appliance is supplied in cardboard packaging secured to a
pallet for transport. Be careful when opening, lift the cardboard
box upwards after having detached it from the pallet.
6.1.3 - Lifting the appliance
There is a bracket (part “A” in figure 6-1) to facilitate installation
that allows the appliance to be lifted.
remove the upper covering as per section 17.2;
hook the lifting cables, “B” in figure 6-1, to the bracket, “A”
in figure 6-1, and lift the heating module;
ATTENTION !!! The lifting cables and system
must be suitable to the purpose. In particular, they
must resist the weight of the appliance, which you can
check in section 18.
install the adjustable feet “A” to level the appliance as per
figure 6-2.
Once the appliance has been positioned properly, the lifting
cables (part “B” in figure 6-1) must be removed before applying
the upper covering.
A
A
020010.01.013
B
MIN 0
MAX 0,39 " (10 mm)
020010_01_030
B = Locking nut
AA
020021.01.009
B
A
B
A
020021.01.010
