CORRECT CRAFT 200-CB Owner'S Manual Download Page 92

Page: 92 / 210

4-23

Controls and Indicators

Basic Navigation Features

All product features are easily accessed through Quick Access Keys,
Menus, and Soft Key commands.

Quick Access Keys

The keys located to the left of the display provide one-button access
to Home, Map, Media, Switching, 3 Event, User Profiles and
Preferences.

MENU Key

Pressing this key displays the Preferences screen and allows access
to System Settings.

Soft Key Commands

Soft key commands provide additional features and navigation
shortcuts. Depending upon the current screen being displayed,
they may appear as an icon or text.

NOTE: The sliding effect of the soft key commands can be toggled
on/off. Go to the

Preferences

screen and select

Button Slide

On/Off

Soft Keys

The soft keys correspond to the Soft Key Commands and activate
features accordingly when pressed.

D-Drive Sec 4_2013_Nautique Ski Sec 4.qxd 7/3/12 10:15 AM Page 23

Summary of Contents for 200-CB



















































































































































































































Search results

Summary of Contents for 200-CB

Reviews:

Related manuals for 200-CB

Brands by name

Popular brands

CORRECT CRAFT 200-CB, Owner'S Manual

Search results

Summary of Contents for 200-CB

Reviews:

Related manuals for 200-CB

Brands by name

Popular brands