CORRECT CRAFT 200-CB Owner'S Manual Download

Page: 110 / 210

4-41

MENU Options

The menu options are accessible by pressing the

SYSTEM

SETTINGS

button on the

PREFERENCES

screen. The following

features are available:

•

GPS Utilities

– contains options to set up track and

position, chart and time, and waypoint manager. Also
displays satellite status.

•

Engine Diagnostics

– displays a list of engine fault codes

and descriptions; on some engines, corrective action will be
shown.

•

System Information

– allows you to customize the display

options for ambient light and brightness, set US or metric
units, specify the Home screen and screen setup status.

•

Dealer Settings

– allows the dealer to select specific settings

for a boat model. This area is protected and a dealer must
enter a dealer code to proceed.

Controls and Indicators

D-Drive Sec 4_2013_Nautique Ski Sec 4.qxd 7/3/12 10:15 AM Page 41

Summary of Contents for 200-CB



















































































































































































































Search results

Summary of Contents for 200-CB

Reviews:

Related manuals for 200-CB

Brands by name

Popular brands

CORRECT CRAFT 200-CB, Owner'S Manual

Search results

Summary of Contents for 200-CB

Reviews:

Related manuals for 200-CB

Brands by name

Popular brands