manualshive.com logo in svg

CORRECT CRAFT 200-CB, Owner'S Manual

Share
Download
CORRECT CRAFT 200-CB Owner'S Manual Download Page 176

8-15

Care and Maintenance

Care of Glass

Your windshield, mirrors and gauge faces all deserve the same
attention as the other parts of your boat. Clean them often with
quality commercially available glass cleaners.

Adhesive-Backed Non-Skid

All adhesive-backed non-skid surfaces can be cleaned by using a
medium-to-stiff brush and warm, soapy water. Make brushing
strokes in the direction of the non-skid grain. Rinse with clean
water and let the non-skid air-dry.

Vinyl Maintenance and

Cleaning 

Nautique has selected the finest marine grade vinyl for your
Nautique. It is important to keep it clean at all times. There are
some substances that will stain the vinyl if you leave them on for
even a short period of time. Remove any contaminant and clean
the area immediately. DO NOT use Formula 409

®

Cleaner,

Fantastik

®

or any silicone-based products. Certain household

cleaners, powdered abrasives, steel wool, industrial cleaners, dry
cleaning fluids and lacquer solvents can cause damage and
discoloration. DO NOT use these cleaners. 

D-Drive Sec 8_2011_Nautique Ski Sec 8.qxd  6/28/10  12:39 PM  Page 8-15

Summary of Contents for 200-CB



















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands