manualshive.com logo in svg

CORRECT CRAFT 200-CB, Owner'S Manual

The CORRECT CRAFT 200-CB Owner's Manual is available for free download on our website. This comprehensive manual provides detailed instructions and essential information to ensure a smooth and enjoyable experience with your CORRECT CRAFT 200-CB. Get your hands on this invaluable resource today at manualshive.com!

Share
Download
background image

10-7

Trailer/Trailering

Hitch 

If you do not already have a trailer hitch installed on your vehicle,
go to a reputable installer to have the proper size hitch installed.
Always use a hitch rated with the appropriate capacity to match the
trailer and boat’s gross weight.

Wiring 

The trailer requires wiring from your vehicle to the trailer lights.
This can usually be done by the hitch company.

S

ecurity 

There are several locking devices available at marine supply stores
to aid in securing your boat whether or not it is attached to your
vehicle.

Storage

Loss of control can cause death or

serious injury. DO NOT attempt to tow more than one
trailer at a time behind your vehicle. Attempting to tow
an additional trailer will adversely affect the trailer
tongue weight.

!

DO NOT use a bumper mounted hitch on

your vehicle. Use a hitch that is attached to the frame of
your vehicle only. DO NOT compromise your equipment,
your safety or the safety of others.

CAUTION

D-Drive Sec 10_2011_Nautique Ski Sec 10.qxd  6/28/10  10:48 AM  Page 10-7

Summary of Contents for 200-CB



















































































































































































































Reviews:

No comments

Related manuals for 200-CB

Klepper Aerius Manual preview
Aerius
Brand: Klepper Pages: 5
C&L Marine Hullabaloo Operation Manual preview
Hullabaloo
Brand: C&L Marine Pages: 14
Farr 6000 Owner'S Manual preview
6000
Brand: Farr Pages: 16
Nacra 500 Owner'S Manual preview
500
Brand: Nacra Pages: 24
NW Explorations La Vida 2022 Operating Manual preview
La Vida 2022
Brand: NW Explorations Pages: 59
Baitstar Xpert Operation Instruction Manual preview
Xpert
Brand: Baitstar Pages: 12
TALAMEX TLM200A Owner'S Manual preview
TLM200A
Brand: TALAMEX Pages: 17
Sailfish 270 WAC Owner'S Manual preview
270 WAC
Brand: Sailfish Pages: 37
Tartan 3700 Owner'S Manual preview
3700
Brand: Tartan Pages: 72
Jeanneau MERRY FISHER 855 OFF SHORE Owner'S Manual preview
MERRY FISHER 855 OFF SHORE
Brand: Jeanneau Pages: 108
Grand S520L User Manual preview
S520L
Brand: Grand Pages: 19
Jeanneau LOISIRS Owner'S Manual preview
LOISIRS
Brand: Jeanneau Pages: 92
Edgewater Networks 190 InShore 2014 Series Owner Assistance Manual preview
190 InShore 2014 Series
Brand: Edgewater Networks Pages: 214
Ocean Kayak VENUS 11 Installation Instructions preview
VENUS 11
Brand: Ocean Kayak Pages: 1
TOPCAT K3X Aassembly Instructions preview
K3X
Brand: TOPCAT Pages: 72
Hewescraft Blue Medicine Operation Manual And Boater'S Handbook preview
Blue Medicine
Brand: Hewescraft Pages: 5
Genesis 1N00-510 User Manual preview
1N00-510
Brand: Genesis Pages: 26
Corsair 2200 Foiler Owner'S Manual preview
2200 Foiler
Brand: Corsair Pages: 41

Brands by name

Popular brands

Load more brands