CORRECT CRAFT 200-CB Owner'S Manual Download

Page: 192 / 210

10-9

Long Trips

DO NOT use your boat and trailer to haul excessive gear.

Each time you stop on a long trip, check the following:

• Make sure the wheel lug nuts are tight and the bearings are

lubricated.

• Make sure the boat is still positioned snugly against the bow

stops.

• Examine the hitch connection to be sure it is firmly attached

and the safety pin and chains are securely fastened.

• Make sure all trailer lights are still functioning properly.
• Re-examine the contents of your boat to ensure that no

items such as life jackets or other gear have shifted and will
not fly out while you are on the road.

Storage

D-Drive Sec 10_2011_Nautique Ski Sec 10.qxd 6/28/10 10:48 AM Page 10-9

Summary of Contents for 200-CB



















































































































































































































Search results

Summary of Contents for 200-CB

Reviews:

Related manuals for 200-CB

Brands by name

Popular brands

CORRECT CRAFT 200-CB, Owner'S Manual

Search results

Summary of Contents for 200-CB

Reviews:

Related manuals for 200-CB

Brands by name

Popular brands