manualshive.com logo in svg

CORRECT CRAFT 200-CB, Owner'S Manual

Share
Download
CORRECT CRAFT 200-CB Owner'S Manual Download Page 206

W-9

Warranty

Procedure:

In the event your Nautique boat has a claim covered by this
warranty, the following procedure shall be allowed to secure
performance of warranty obligations:

1. Notify the selling dealer in writing within thirty (30) days after

the discovery of any claimed defect.

2. You may be required to transport the boat, at your expense, to

an authorized dealership or service facility for their inspection
and/or repair.

3. Nautique reserves the right to require further evaluation

and/or information regarding a warranty claim against a boat
prior to its repair as well as designate the place of repair.

Nautique reserves the right to make changes in prices, color,
specifications, equipment, options, materials, hull, decks, and/or
discontinue models at any time (without notice), and shall be
under no obligation to equip or modify boats built prior to such
changes.

Nautique Customer Care, 14700 Aerospace Pkwy, Orlando, Florida
32832. 407/855-4141, FAX 407/851-7844, E-mail address:
[email protected]. Effective 2013 Coastal Edition Model boats.

D-Drive Warranty_2013_Naut Air Warr.qxd  7/2/12  2:06 PM  Page W-9

Summary of Contents for 200-CB



















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands