manualshive.com logo in svg

CORRECT CRAFT 200-CB, Owner'S Manual

Share
Download
CORRECT CRAFT 200-CB Owner'S Manual Download Page 114

4-45

Depth and Position Settings

Controls and Indicators

Soft Key

Description

LEFT – RIGHT – UP – DOWN ARROW

soft keys are used

to navigate the different areas in the Depth and Position
Settings.

POSITION FORMAT SELECTION

– select the position

from available settings: 

• Degrees and Decimal Degrees 
• Degrees, Minutes and Decimal Minutes 
• Degrees, Minutes, Seconds and Decimal Seconds 

DEPTH CONTOUR

– select depth contour from available

settings: 

• All 
• 66ft 
• 33ft 
• 16ft 
• 6ft 
• Off 

SAFELY CONTOUR

– select contour from available settings: 

• 66ft 
• 33ft 
• 16ft 
• 6ft 
• Off

BACK TO GPS UTILITIES

– select to return to the GPS

Utilities screen.

D-Drive Sec 4_2013_Nautique Ski Sec 4.qxd  7/3/12  10:15 AM  Page 45

Summary of Contents for 200-CB



















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands