Use and Maintenance Manual – 08/2018 Rel. 4
Page 26
NB
If the weight position is significantly different from the vertical position, the machine will refuse to perform the spin and it
will display an error code ERR 043. If the motorcycle adaptor is near to the vertical position but not in the precise vertical
position, the machine will spin but at the end of the calibration each balancing spin will have an error in the balancing
angular position of the weights.
8
Lower the wheel guard: the machine will run a launch.
9
At the end of the launch, the
machine will display the message
shown here. Apply the calibration
weight to the outer side as shown
here. The calibration weight must
be applied on the hole marked
with the “CAL” inscription.
10
Move the motorcycle adaptor to a
stable vertical position with the
calibration weight at the top as
shown in the figure. If the weight
position is significantly different
from the vertical position, the
machine will refuse to perform
the spin
and it will display an error
code ERR 043.
11
Lower the wheel guard: the
machine will run a launch.
