Use and Maintenance Manual – 08/2018 Rel. 4
Page 32
16.3.2 Automatic acquisition of the wheel dimensions for the ALS1, ALS2 program types
To automatically enter the dimensions of the wheel in the ALS1 and ALS2 program types proceed as described below
:
Ph.
1
Fit the wheel on the shaft and tighten with the ring nut.
2
Extract the
Distance/Diameter
sensor and place it on the
plane chosen as the
internal plane.
Wait to hear the short acquisition
beep.
3
Keep on sliding the
Distance/Diameter sensor
and place it on the plane
chosen as the external
plane.
