Use and Maintenance Manual – 08/2018 Rel. 4
Page 19
3
Remove the wheel and any other
accessories from the shaft.
Lower the wheel guard: the
machine will run a launch.
4
Fit the wheel on the shaft.
Manually enter the
wheel dimensions.
If the dimensions of the wheel
were introduced before entering
the calibration program, this step
can be skipped.
It is not possible to enter the data
with the automatic acquisition
system.
5
Extract the distance sensor and
place it on the wheel as shown
here.
Read the distance value on the
graduated scale. The distance
value is always expressed in
millimeters.
