Use and Maintenance Manual – 08/2018 Rel. 4
Page 12
13. MONITOR
The machine's control monitor is illustrated in figure F13.1. The control monitor is used by the operator to view the applied controls
and the data entered with the keyboard. The same control panel displays the balancing results and machine messages. The functions
of the various parts of the monitor are described in table T13.1 while the control key functions are described in table T13.2.
Figure F13.1: Control monitor
Table T13.1: Functions of different parts of the control monitor
Pos.
Description
1
Status icon band.
2 – 4
Display shows unbalance value inside – outside.
3
Imbalance Position indicator. Position depends by the Program and Wheel Type selected.
5
Previous page.
6
Control icon band.
7
Next page.
8 – 9
Indicator shows angular unbalance position inner - outer.
10
Wheel dimensions data band.
The programs can be selected in NORMAL mode
BY PRESSING ON THE MONITOR THE ICONS
.
The control icons are equipped with two white arrows, therefore, by pressing the same icons you select the required option.
The status icon are equipped with one blue arrow, therefore, by pressing the same icons you select the required working mode.
3
1
2
10
4
8
6
9
5
7
