Use and Maintenance Manual – 08/2018 Rel. 4
Page 5
Figure F6.4: Place the plastic front cover onto support.
Figures F6.5, F6.6 and F6.7: Fix the monitor with no. 4 M4 screws at the front plastic cover. Pay attention to the “ALTO/UP” UP side.
Figure F6.8 and Figure F6.9: Fix the rear plastic cover onto support with no. 3 M6 screws.
6.2 Installing wheel guard + wheel guard support
The wheel guard and its support must be installed as shown in following figures.
Figure F6.10 and Figure F6.11: Place the red tube inside the relative pin and secure it with no. 2 M8 bolts.
Figure F6.12 and Figure F6.13: Remove the wheel guard from the packaging and place it on the red tube.
