Use and Maintenance Manual – 08/2018 Rel. 4
Page 34
16.3.3 Balancing spin and search for planes (ALS1)
Proceed as described below:
Ph.
1
Fit the wheel on the shaft and tighten with the ring nut.
2
Lower the wheel guard to run the
balancing spin. At the end of it,
the unbalance data calculated
based on the balancing planes will
be displayed. External unbalance
always at 6 o’clock LASER
function.
3
The laser pointer will indicate the
application position where to
apply the external weight (at 6
o’clock), while the internal weight
should be applied at 12 o’clock
position.
The weights must
always be applied at 6
o’clock on the external
side (on laser line), and
at 12 o’clock internal
side.
