Cormach TOUCH MEC 100, Use And Maintenance Manual

Page: 6 / 57

Use and Maintenance Manual – 08/2018 Rel. 4 Page 1
CONTENTS
1. Introduction Page 2
2. Intended use Page 2
3. General safety rules Page 3
3.1 Safety devices Page 3
4. Transports and handling Page 3
5. Unpacking Page 4
6. Installation and commissioning Page 4
6.1 Installing display support Page 4
6.2 Installing wheel guard + wheel guard support Page 5
6.3 Installing external sensor Page 6
6.4 Electrical connection Page 7
7. Installation Page 7
8. Suspension of the use Page 8
9. Environmental information Page 8
10. Technical data Page 9
10.1 Machine dimensions Page 9
10.2 Working range Page 9
10.3 Presentation of the machine Page 11
11. Serial number plate information Page 11
12. Ordinary maintenance Page 11
13. Monitor Page 12
13.1 Switching on Page 14
14. Operating modes STANDARD, SERVICE, STAND BY Page 15
15. Machine calibration Page 17
15.1 When to carry out machine calibration Page 17
15.2 Machine calibration for the CAR/SUV Wheel Type Page 18
15.3 Machine calibration for the MOTO wheel type Page 24
16. Use of the machine in normal mode Page 27
16.1 Program Type selection (Program Type) Page 28
16.2 Wheel Type selection (Wheel Type) Page 29
16.2.1 MOTO wheel type (motorbikes) Page 30
16.3 Entering wheel dimensions Page 31
16.3.1 Automatic acquisition of the wheel dimensions for the STD program type Page 31
16.3.2 Automatic acquisition of the wheel dimensions for the ALS1, ALS2 program types Page 32
16.3.3 Balancing spin and search for planes (ALS1) Page 34
17. Hidden weights program Page 35
18. Second operator Page 39
19. Utility programs Page 40
19.1 Selection the imbalance display resolution Page 40
19.2 Selection of the static imbalance display Page 41
19.3 Electromagnetic clamping brake Page 42
19.4 Illuminator Page 43
19.5 SWI wheel stop procedure on the positions of imbalance Page 44
19.5.1 Automatic SWI procedure Page 44
19.5.2 SWI procedure at low speed Page 44
19.5.3 Manual SWI procedure Page 44
19.6 Select grams/ounces Page 45
19.7 Select inches/millimeters Page 46
19.8 Select weight material in Fe/Zn or Pb Page 47
20 Error codes Page 48
21 Warning codes Page 49
21.1 Acoustic signals Page 49
21.2 Special visual signals Page 50
22. Diagnostics and efficiency of accessories Page 50
23. Fire prevention means to use Page 50