Corghi AGTT 1600, Operator'S Manual

Page: 40 / 188

40 Operator's manual
AGTT 1600A - AGTT 1600
the operator is subject to include the duration of the exposure, the characteristics of
the workplace, other sources of noise, etc. The permitted exposure levels may also vary
according to the country. However, this information will enable machine users to make a
more accurate assessment of hazard and risks.
ACCESSorIES InClUDED WITH THE
mACHInE
- Rim pliers
The locking pliers, when fixed firmly to the rim edge prior to mounting, makes it easier
to lift the tyre, insert it into the rim well and keep it in position.
- Bead lifting lever
The bead lifting lever keeps the bead in position on the tool when demounting agri-
culture wheels.
- Side ring lever
The bead rim lever is used to make it easier to remove the rims from the earthmoving
wheels that use them.
- Grease gun
The grease gun is used for the monthly greasing recommended for all moving machine
parts.
oPTIonAl ACCESSorIES SUPPlIED on
rEQUEST
Please refer to the relevant accessories catalogue.
SPECIFIED ConDITIonS oF USE
The tyre changer was designed exclusively for tyre mounting and demounting.
WARNING
Any other operations carried out on the machine are considered as improper use and
shall be construed as negligence.
DANGER
The manufacturer does not intend the machine to be used for inflation operations.
If the operator decides to proceed with partial bead insertion in the tyre on the ma-
chine using his own equipment, a pressure of 0.5 bar must NOT be exceeded (unless
the tyre manufacturer does requires lower pressure levels), as indicated in the UNI
Standard 10588.
WARNING
Do not clean or wash the wheels mounted on the machine with compressed air or
jets of water.