Corghi AGTT 1600, Operator'S Manual

Page: 35 / 188

Operator's manual
AGTT 1600A - AGTT 1600
35
UK
mACHInE HAnDlInG AnD
STorAGE
Machines in their packaging must be stored in a dry place, with ventilation if possible.
Place the packs far enough apart to allow the information provided on the sides of the
packaging to be read easily.
CAUTION
Do not stack more than two packs to avoid damaging them.
- Packaging dimensions: (Fig. 1).
• Depth (B) ................................................................................................................. 2600 mm
• Width (A) ................................................................................................................. 3065 mm
• Height (C) ................................................................................................................. 2150 mm
- Weight
• Machine with packaging ........................................................................................... 1450 kg
• Machine ...................................................................................................................... 1350 kg
- Position of the barycenter (Fig. 2)
• Width D .................................................................................................................... 1200 mm
• Depth E ................................................................................................................... 1100 mm
- Ambient temperature for storing the equipment: -25° - +55°C
Handling
WARNING
Carry out carefully the assembly and handling operations described. Failure to comply
with these recommendations may cause damage to the machine and put the operator
at risk.
WARNING
Before handling the machine, compare its barycentre and weight with the capacity of
the lifter you have chosen.
To move the packaged machine, insert the tines of a fork-lift truck into the slots on
the base of the packaging itself (pallet) (Fig. 2).
WARNING
The packaged machine must not be lifted using a crane or hoist (Fig. 3). Use the hook-
ing point to handle the machine without its packaging (Fig.4).
CAUTION
Gripping the various projecting parts of the structure in a manner not recommended
here is absolutely forbidden. When moving it after installation, position the machine
as shown in Fig. 4 to guarantee that the load is correctly balanced. If necessary, move
the electrohydraulic power unit on the base as shown in Fig.5.