P78 Piezo Z Microscope Scanner User Manual
8
5.2 Load
When mounting the load, ensure that the load quality is less than the maximum load
capacity of P78, and try to mount the load in the center of the moving surface.
The correct position to mount the load is shown below.
FIG.5 The load is applied to the center of the moving surface
FIG.6 Try not to let the position of the center of gravity far exceed the active platform
For the protection of the product, we do not recommend that the load is too high. If a
high load must be used, please appropriately low the position of the center of gravity of
the load.
The wrong mounting way is shown in the figure below:
