7
1. Ensure that the installation plane is relatively flat.
2. Use M4 or M6（P78.Z100）to mount P78 on the mounting surface directly and tighten
it.
3. Grounding protection for connection, as shown below:
4. Mounting the load and tighten it properly to ensure the positioning accuracy.
5. Connect the P78 connector with the corresponding controller according to the
identification.
The wiring mode of Lemo connector is shown as below:
FIG. 3 Grounding protection diagram
Safety washer
Flat washer
Platform
Cable
connector
Ground protection
Screw
FIG.4 Connector diagram
Sensor output
Label for sensor output
Label for PZT drive
PZT drive output
