COP-USA DVR2716AE-SL User Manual Download

Page: 41 / 93

AHD DVR User Manual

Search, Playback & Backup

Search configuration includes four submenus: time search, event search, file management and
image.

5.1 Time Search

①

Go to Main Menu



Time Search. Refer to Fig 5-1.

Fig 5-1 Search Configuration-Time Search

②

Select date and channels on the right hand side and press the “Search” button. A date

with highlighted borderline indicates presence of data.

③

Set the start time by clicking a particular grid or by entering the specific value in the

start time field.

④

Select the channel display mode and click Play button to play record. Use the playback

toolbar to control the playback.



To set backup during a certain period in the playback interface:

Select the start time by dragging the slider and click

icon. Then select the end time and

click this icon again to confirm the record period. Next, click

icon to backup the record

during this period.

Summary of Contents for DVR2716AE-SL





























































































Search results

Summary of Contents for DVR2716AE-SL

Reviews:

Related manuals for DVR2716AE-SL

Brands by name

Popular brands

COP-USA DVR2716AE-SL, User Manual

Search results

Summary of Contents for DVR2716AE-SL

Reviews:

Related manuals for DVR2716AE-SL

Brands by name

Popular brands