Mobile Surveillance User Manual
5
: Sensor alarm
: Motion alarm
: Motion /sensor alarm based recording or manual recording
2.2.3 Server List
Click
button to pop up the following picture.
Add device: Click
【
Add
】
button in the top right corner to pop up a dialog box as shown in the
following left picture. Input the relative information of the device and click
【
Save
】
button.
Scan: Scan the QRCODE.
Delete device: Click
button behind the device name to delete this device.
Edit device: Click
button behind the device name to edit the information of this device.
Backup & Restore: It is recommended to click
【
Backup
】
button to reserve the information of
all devices. Then you can click
【
Restore
】
button to restore all device information after you
re-install the client or delete the device uncarefully.
indicates the device has been connected;
indicates the device is connecting;
indicates the device is not connected.
2.2.4 Live Preview
Once you access the device, the system will automatically display the screen mode in accordance
with the channel number of the device.
Click “Screen mode” button to select channel as shown in Fig 1.
When there is video playing in a screen, you can switch the channel by pressing and holding
the screen as shown in Fig 2.
When no video is playing in a screen, click this screen to choose channel as shown in Fig 3.
When the single channel is playing, you can zoom in/out the image by flicking you finger up