CooperSurgical K-Systems L100 IVF Series, Instruction Manual

Page: 73 / 88

73
INSTRUCTION MANUAL FOR L100 SERIES WORKSTATIONS
15 MONITOR
15.1 Description
The monitor is a high-grade Liquid Crystal Display (LCD) dual-input flat panel monitor. It features a 19"
Thin Film Transistor (TFT) with anti-glare treatment. A super wide 170° viewing angle and 1600 X 1200
resolution.
The monitor has 3 inputs allowing it to be connected to most types of computers, cameras or video units.
One is digital (VGA) and the two others are analog inputs (composite and S-VHS).
A composite (yellow) cable and a VGA cable (blue or black) will be connected to the monitor when the
workstation is shipped. The monitor will be set up for auto switching between the signals. This means
that the monitor will recognize the input type itself and adjust the picture to it. When there is no signal,
the monitor will remain black.
NOTE: Only connect one type of signal to the monitor at a time or use the switch function on the
keyboard.
See the following for a description for other types of connectors and suggested alternative connection
possibilities.
15.2 Connectors and Cables
15.2.1 Composite Video Connector
This is for a camera or video recorder.
15.2.2 Composite to S-VHS Adapter
A converter piece is supplied that will allow
S-VHS input on the composite cable.
15.2.3 S-VHS Video and Audio Connector
(Not connected as standard from the factory)
15.2.4 DE–15 Male VGA Connector
This cable is for a computer to use the monitor
as a screen.