38
www.cooperbussmann.com/wirelessresources
Cooper Bussmann 915U-2 Wireless Mesh I/O and Gateway User Manual
Rev Version 1.2.2
Once a 915U-2 module is added to the project, selecting the module in the project tree displays the Unit Details
screen where you can enter or change information about the module.
Figure 32 Unit Details
Unit Type
Radio model.
Device Name
Unique name that can be assigned to the software and radio.
Username and
Password
Used to access the 915U-2 module in order to program, load, and diagnose issues.
Prevents unauthorized access to the 915U-2 module.
Owner, Contact,
Description, and
Location
Details that you can add to provide information about the module.
Configuration
Version
Displays the time and date when the current firmware was last updated. This
information is not editable and is only updated when the module is programmed or
read.
Radio Network
Configuration
Radio IP address of module, as described in “Adding Units to a Project.”
IP Gateway Mode
Select this option when using the 915U-2 as the main gateway node to allow for
remote over-the-air access for activities such as remote configuration or displaying
diagnostics.
Ethernet Address
IP address of the actual physical Ethernet port on the 915U-2 module. Details for
setting the IP address are found in “Editing Module IP Addresses” on page 41.
Delete Unit
Removes the 915U-2 from the project (no undo).
