CONVEY-ALL CST-1634, Operator'S Manual

Page: 7 / 50

01.2016 1-1
Operator’s Manual: Commercial Seed Tender (CST-34 Series)
Section 1: INTRODUCTION
Congratulations on your choice of a Convey-All Commercial Seed Tender to complement your seed delivery
system in your agricultural operation. This equipment has been designed and manufactured to exceed the exacting
standards for such equipment in the agricultural industry and will keep your seed delivery operation working at
optimum efficiency.
The tender is intended to be mounted onto a truck bed. The CST and truck are separate equipment. There is no
information relating to the truck in this document.
Safe, efficient and trouble free operation of your tender system requires that you and anyone else who will be
operating or maintaining the machine, read and understand the Safety, Operation, Service & Maintenance and
Trouble Shooting information contained within this Operator’s Manual.
Keep this manual handy for frequent reference and to pass on to new operators or owners. Call your Convey-All
Industries Inc, dealer or distributor for assistance, information, additional/replacement copies, or a digital copy of
this manual.
1.1 OPERATOR ORIENTATION
The directions; left, right, front and rear, as mentioned
throughout this manual, are as seen from the truck
driver’s seat and facing the direction of travel.
1.2 SERIAL NUMBER LOCATION
Always give your dealer the serial number of your
bean tender when ordering parts or requesting
service or other information.
The tender’s serial number is located on the rear
hopper support leg, beside the hydraulic valves.
Write the numbers in the below for easy reference.
CST Model No: __________________________
CST Serial No: __________________________
Engine Model No. (if equipped): ________________
Engine Serial No. (if equipped): ________________
Fig 1 - Rear, Driver Side of Tender