CONVEY-ALL CST-1634, Operator'S Manual

Page: 15 / 50

01.2016 2-7
Operator’s Manual: Commercial Seed Tender (CST-34 Series)
• Be familiar with machine hazard areas. If anyone
enters these spaces, shut down machine
immediately. Clear the area before restarting.
• Keep hands, feet, hair and clothing away
from all moving and/or rotating parts.
• Do not allow riders on the tender when
transporting.
• Keep working area clean and free of
debris to prevent slipping or tripping.
• Stay away from overhead obstructions
and power lines during operation and transporting.
Electrocution can occur without direct contact.
• Do not operate machine when any guards are
removed.
• Set park brake on tractor before starting.
• Be sure that conveyor is empty before raising/
lowering, swinging or folding.
2.9 OPERATING SAFETY
• Please remember it is important that you read and
heed the safety messages on the CST. Clean or
replace all decals that cannot be clearly read and
understood. They are there for your safety, as well
as the safety of others.
• Ensure that everyone operating the
CST, working on, or around it, reads
and understands all the information in
the operator’s manual.
Review the safety, operating and maintenance
instructions annually.
• Keep all bystanders, especially children, away
from the machine when loading or unloading. Only
authorized personnel should be in the area when
carrying out maintenance work.
• Do not place hands, arms or body
between tender and folding conveyor
frame to prevent pinching or crushing.
Components can move unexpectedly.
•
• Never work near the hopper gate
cylinders while they are in operation.
• Use care when climbing on frame or
ladder to prevent slipping or falling.
• Establish a lock-out, tag-out policy for the work site.
Be sure all personnel are trained in and follow all
procedures. Lock-out, tag-out all power sources
before servicing the unit or working around loading/
unloading equipment.
• Place all controls in neutral. Stop the engine.
Remove ignition key and wait for all moving parts
to stop before servicing, adjusting, repairing or
unplugging.