CONVEY-ALL CST-1634, Operator'S Manual

Page: 23 / 50

01.2016 3-5
Operator’s Manual: Commercial Seed Tender (CST-34 Series)
Fig 12 - Electric Roll-Top Tarp
Fig 14 - Mounting Bracket Hardware
Electric Roll-Top Tarp:
A tarp is used to cover the hoppers. It is run by an
electric motor.
The tarp motor is controlled by a red, toggle
switch which is attached to the frame on the front,
driver-side.
Fig 15 - Sight Glass
Fig 13 - Tarp Controls
Sight Glass:
Each hopper in the tender is designed with an upper
and lower sight glass to allow the operator to monitor
the amount of material in the hopper.
Mounting Bracket Hardware:
The CST is sold with the mounting hardware strapped
inside the frame, below the first hopper. Use these
brackets to attach the tender to the truck frame.
Note:
The 2 brackets with springs are
to clamp the front of tender to the truck bed,
giving some flex to the unit.