CONVEY-ALL CST-1634, Operator'S Manual

Page: 19 / 50

01.2016 3-1
Operator’s Manual: Commercial Seed Tender (CST-34 Series)
Section 3: OPERATION
It is the responsibility of the owner or operator to read this manual and to train all other operators before they start
working with the tender. Follow all safety instructions exactly. It is everyone’s business. By following recommended
procedure, a safe working environment is provided for the operator, bystanders and the area around the work site.
The design and configuration of this tender includes safety decals and equipment. Hazard controls and accident
prevention are dependent upon the personnel operating and maintaining it. Their awareness, concern, prudence
and proper training are crucial.
Many features incorporated into this machine are the result of suggestions made by customers like you. Read this
manual carefully to learn how to operate the machine safely. There are instructions on how to set it, to provide
maximum efficiency. By following the operating instructions, in conjunction with a good maintenance program, your
CST will provide many years of trouble free service.
• Read and understand the Operator’s Manual,
and all safety decals, before using. Review safety
related items annually.
• Place all controls in neutral, stop the engine,
remove ignition key. Wait for all moving parts to
stop before servicing, adjusting, repairing or
unplugging.
• Clear the area of bystanders, especially children,
before starting. If anyone enters hazard areas,
shut down machine immediately. Clear the area
before restarting.
• Install and secure all guards before starting.
Do not operate machine when any guards are
removed.
• Use care when climbing on frame or ladder to
prevent slipping or falling.
• Do not allow riders on the CST when transporting.
Operating Safety
• Stay away from overhead obstructions and power
lines during operation. Electrocution can occur
without direct contact.
• Keep hands, feet, hair and clothing away from all
moving and/or rotating parts.
• Do not place hands, arms or body between
compartment and folding conveyor frame to
prevent pinching or crushing. Components can
move unexpectedly.
• Keep hydraulic components in good condition.
• Keep working area clean and free of debris to
prevent slipping or tripping.
• Establish a lock-out, tag-out policy for the
work site. Train all personnel in, and follow all
procedures. Lock-out, tag-out all power sources
before servicing the unit or working around
loading/unloading equipment.