CONVEY-ALL CST-1634, Operator'S Manual

Page: 26 / 50

Operator’s Manual: Commercial Seed Tender (CST-34 Series)
3-8 01.2016
3.5 OPERATING ON SITE
The Convey-All CST is designed to handle any kind of
seed, granular or chemical. Use the unit to transport it
to or from the field as required.
Inspect the machine at the start of each day to be
sure it is in good mechanical condition.
Follow these procedures when using the CST:
1. Review the Pre-Operation Checklist.
Refer to Section 3.5
2. Transport to the working location.
3. Set truck’s park brake.
- Connect the hydraulic lines.
4. Open roll top cover.
5. Fill the hopper(s).
6. Close the roll-top cover.
7. Transport to the unloading area.
8. Remove the locking pin from the Folding Conveyor.
9. Move the folding conveyor into position.
Refer to page 3-3 for hydraulic valve operation.
Note:
The folding conveyor frame can be
swung through a 80° arc,
to fill more than one compartment on a
planter, drill, distributor or spreader.
Fig 17 - Drive Tender to Working Location
Fig 18 - Locking Pin
Fig 19 - Valves to Position Conveyor
Fig 20 - Conveyor Motor Valve
10. Start the conveyor belt(s).
Note:
Both Slave and Folding Conveyors are
controlled with one valve. Each has a
pre-set speed, so the Folding Conveyor will
not become plugged from overfeeding.