CONVEY-ALL CST-1550, Operator'S Manual

Page: 38 / 62

3-16 Revised 09.2020
Operator’s Manual: CST-1550
STRANGULATION HAZARD
Careful the wireless handset does not
become caught in running machinery,
while hanging from the neck.
11. Disengage the Battery Lock-Out Switch
12. Start engine.
Fig 44 - Engine
Fig 45 - Rear conveyor transport lock
Fig 46 - Swing rear conveyor
Fig 47 - Position rear conveyor
13. Refer to page 3-4 for hydraulic valves.
Refer to Section 3.6 for an explanation of
wireless handset functions.
14. If the rear conveyor is to be used for
unloading, refer to Section 3.7 to move rear
conveyor into working position.
Note:
The conveyor will need a 26’ radius of
open space around the tender to swing.
IMPORTANT:
Always lower conveyor to run at 40° or less.
Capacity will be drastically reduced
at steeper angle.
15. Move the rear conveyor into position.
16. The rear conveyor can be swung through a
114° arc, and raised to a 40° angle, to allow
it to fill more than one compartment in your
planter, drill, distributor or spreader.
17. Start the conveyor belt(s).
Note:
Rear conveyor hopper must be below slave
discharge for rear belt to run.
Both belts are operated with one switch.
They have preset speed differences
to prevent plugging.