CONVEY-ALL CST-1550, Operator'S Manual

Page: 30 / 62

3-8 Revised 09.2020
Operator’s Manual: CST-1550
Fig 27 - Light and camera on rear conveyor discharge
Fig 28 - Working lights
Cameras:
A camera is mounted on the discharge of the
slave conveyor, and the rear conveyor.
The cables for the cameras monitor screen are
routed to the front of the tender by the factory.
From there, the owner can hook up the screen
to the truck cab, or another location.
Working Lights:
There are 2 lights mounted at the top, rear of
the unit.
Another light is situated at the end of the rear
conveyor discharge spout.
There are three smaller lights located:
• above the engine
• above the fuel tank and hydraulic reservoir
• above the hydraulic valve bank
The lights are controlled using the wireless
handset.
Gate Light Box:
There is a box containing LEDs on the rear
frame.
When a gate is opened, the corresponding red,
numbered LEDs will illuminated.
Be sure to press the button on the handset until
the LED goes out, then the gate is completely
closed.
The green LED, between #3 and 4, indicates
when the rear conveyor is at rotation centre.
Fig 29 - Gate Light Box. Arrow points to the green LED