Revised 10.2020
3-15
Operator’s Manual: CST-1550
3.9 OPERATING ON SITE
The Convey-All™ CST is designed to handle any
kind of seed, or granular chemical. Use the unit
to transport it to or from the field as required. The
tender can also be used to transport product to
market.
Inspect the machine at the start of each day to
be sure it is in good mechanical condition.
1. Perform Pre-Trip and Pre-Operation
Inspections.
Refer to Section 3.4 and 3.5
2. Attach the CST trailer to the towing truck.
3. Transport to the working location.
4. Set truck park brake and remove ignition
key.
5. Disengage Battery Lock-Out Switch, to give
battery power to the tarp controls.
6. Open roll tarp.
7. Fill the compartment(s).
8. Close the roll-tarp.
- Keeping the tender compartments covered
as much as possible helps to protect the
paint coating from sun damage.
9. Engage the Battery Lock-Out Switch.
Fig 40 - Transport to the location
Fig 41 - Engine control and battery lock-out
Fig 42 - Open roll top
Fig 43 - Transporting CST to site
10. Transport to the unloading area.
Summary of Contents for CST-1550
