CONVEY-ALL CST-1550, Operator'S Manual

Page: 56 / 62

Operator’s Manual: CST-1550
5-2 01.2019
Problem
Possible Cause Possible Solution
Belt Does Not Track Correctly
Roller lagging may be worn Replace roller or have it re-lagged
Conveyor Belt Will Not Run
No power Start engine, increase speed to maximum RPM
Low Capacity
Hydraulic system - valve, pump or motor
could be malfunctioning
Check and adjust pressure set screw on valve. Test
flow from pump. Check for oil leaks under motor.
Replace what is needed.
Wireless Handset Not Functioning
Batteries may have died during storage Ensure batteries are good
Batteries replaced, but still won’t work Need to synchronize wireless handset to Receiver
Charging Battery Will Short Wireless Electrical System
Boosting current will short electrical system
If boosting to start engine, remove fuse from receiver
box. If recharging battery, disconnect from CST.
No Hydraulic Flow
Flow valve closed Open flow circuit valve
Hydraulic filter plugged Replace plugged hydraulic filter