CONVEY-ALL CST-1550, Operator'S Manual

Page: 23 / 62

Revised 05.2021 3-1
Operator’s Manual: CST-1550
The Convey-All™ Commercial Seed Tender has many features incorporated into it as a result of
suggestions made by customers like you.
Hazard controls and accident prevention depend on the personnel operating and maintaining the
equipment. Their concern, attentiveness and proper training are crucial.
It is the responsibility of the owner and operators to read this manual and to train all personnel before they
start working with the machine. By following recommended procedure, a safe working environment is
provided for the operator, co-workers and bystanders in the area around the work site.
By following the these procedures, in conjunction with a good maintenance program, your tender will
provide many years of trouble free service.
Section 3:
OPERATION
• Read and understand the Operator’s Manual,
and all safety decals, before using.
• Place all controls in neutral, stop the engine,
remove ignition key. Wait for all moving parts
to stop before servicing, adjusting, repairing
or unplugging.
• Clear the area of bystanders, especially
children, before starting.
• Install and secure all guards before starting.
Do not operate machine when any guards
are removed.
• Use care when climbing on frame or ladder
to prevent slipping or falling.
• Stay away from overhead obstructions and
power lines during operation. Electrocution
can occur without direct contact.
• Do not allow riders on CST when transporting.
• Keep hands, feet, hair and clothing away
from all moving and/or rotating parts.
• Do not place hands, arms or body between
the trailer and rear conveyor frame to
prevent pinching or crushing. Components
can move unexpectedly.
• Keep hydraulic components in good condition.
• Keep working area clean and free of debris
to prevent slipping or tripping.
• Establish a lock-out, tag-out policy for the
work site. Train all personnel in, and follow
all procedures. Lock-out, tag-out all power
sources before servicing the unit or working
around loading/unloading equipment.