46
CONVAID USER’S GUIDE
Items Included in Kit:
1. 2 Front Transit Anchors
2. 2 Rear Transit Anchors
3. Attaching Hardware
4. 4 Transit Anchor Logo Stickers
5. 1 Transit Ready Serial Label Sticker
Fig. 174
Fig. 175
Fig. 176
Cruiser Transit Anchor Installation
Transit Anchors
WARNING:
Follow the instructions provided to securely install the transit
anchors to your wheelchair.
WARNING:
Only use high strength fasteners provided by Convaid to attach
the transit anchors.
WARNING:
The transit anchors are to be installed one time only using the
hardware provided. Removal and reinstallation of the transit anchors will
weaken the fitting of the hardware.
WARNING:
Engage wheelock brakes before installing the transit anchors.
WARNING:
For specific maximum transit weight capacity of your
wheelchair, please see below:
• CX10 - 30 kg
• CX12 - 30 kg
• CX14 - 45.5 kg
• CX16 - 77 kg
• CX18 - 77 kg
To Install Transit Anchors
1. Before attaching each transit anchor, apply Loctite adhesive to the end of each corresponding
bolt.
2. Attach 2 transit anchors to the front left and right sides of the frame. Fig 175
3. Secure the hardware using a 5/32” Allen wrench and tighten the bolt to 47in-lb, 5.3 N•m.
Fig. 176
4. Attach 2 transit anchors to the rear left and right side of frame. Fig. 177, Fig. 178
