14
CONVAID USER’S GUIDE
Fig. 24
Fig. 25
Fig. 26
Fig. 27
Seat Depth
Seat Depth Tube Replacement
Measure the distance from the
most posterior portion of the
buttocks to the back of the knee.
Subtract from that measurement
1-2” (25-51mm) to allow ade-
quate clearance between the seat
and the back of the knee. Fig.24
To change seat depth:
1. Partially fold the chair to relieve
fabric tension. Undo the Velcro
®
back panel of the two-piece seat.
2. Grasp end of seat tube, press
spring button and move seat tube
until spring button relocates into the
desired hole.
3. Repeat for other side of seat.
Fig.25
Seat depth
1. To change seat tubes or remove the seat tubes,
press spring button. To install new seat tubes, press
spring button and release when desired setting is
achieved Repeat for opposite side. Fig.26,27
2. Reinstall fabric. Repeat for opposite side.
Note:
For Cruiser Planar model, skip step 2.
