59
CONVAID USER’S GUIDE
Fig. 208
Fig. 209
Fig. 210
With a small screw driver, press the pad downward until it is clear of its housing. Fig.208
Remove the two springs from the old pad assembly Fig.209. Attach the two springs to the
new pad assembly making certain that the hooks are properly seated over the two sheet
metal steps. Fig.210
To install new pads, first insert inner pad as shown.
Note:
Spring should lightly clip onto the small
post in the center of the piston and push inward.
Using the 2.5mm Allen wrench inserted into (A),
replace the pad into the housing. At the same time,
turning counter-clockwise, insert a flat head screw
-
driver to push the pad. Fig.212
Fig. 211
Fig. 212
A
