background image

15

CONVAID USER’S GUIDE

1.  Remove Seat Upholstery. Fig.28,29

2.  Change and Install Seat Depth Tubes.

3.  Press spring button and move Seat 

Depth Tube to desire setting. Fig.30

4.  Install Support Strap. Note: Make sure 

rough, shiny side of strap is facing out. 

Fig.31-34

5.  Install Seat Upholstery. Fig.35

Attaching Support Strap for Seat Extension Tubes  

Two-Piece Seat  

Fig. 28

Fig. 30

Fig. 34

Fig. 32

Fig. 29

Fig. 31

Fig. 35

Fig. 33

Fig. 36

Fig. 37

Fig. 38

FOR TEXTILENE UPHOLSTERY: Only Applicable to: CX 14-18

Make sure the seat depth 

tube inserts into the black 

web loop located on the

inside corner of the 

textilene upholstery. Fig.36-38

The lower seat panel is attached to the back panel with Velcro

®

It is used to take up slack in the seat panel after seat depth adjustments have been made.

Fig. 39

Excessive Velcro

®

 

overlap lifts seat 

fabric and pushes 

hips forward, cre-

ating poor posture 

and reducing 

effective seat 

depth. Fig.39

Correct 

Velcro

®

adjustment 

provides room 

for hips, and 

makes greater 

use of seat 

depth.

Wrong

Correct

Summary of Contents for Cruiser CX10T









































































Reviews: