57
CONVAID USER’S GUIDE
To increase brake pressure, turn adjusting nut (A) counter
clockwise, then turn locknut (B) clockwise to secure nut (A) in
position. Fig. 201
Note:
Adjust when lever pressure is too high.
Turn nut clockwise to move pad closer to disk (wheel should spin
and not grab). Fig.202
Brake pads should wear no thinner than 1mm before replacement.
Fig.204
Lever Adjustment
Inner Pad Adjustment
Outer Pad Adjustment
Brake Pad Wear
Fig. 201
Fig. 202
Fig. 203
Fig. 204
Insert Allen wrench (2.5mm) into the screw, turn
clockwise to move pad closer to disk (wheel should spin and not
grab). Fig.203
1mm
A
B
