40
CONVAID USER’S GUIDE
Heavy-Duty Reinforced Upholstery
Reducer Seat Insert
Rear Anti-Tip Tubes
Heavy-duty, reinforced, padded seat and seat back come with
pockets which have removable plastic stiffeners. Use when
extra firmness is required. Stiffeners easily lift out of pockets
for custom-forming with a heat gun. Fig.157
The Reducer Seat Insert provides proper positioning in
an oversized wheelchair. This cushion easily slips into
the seat of the chair to reduce the seat width 2” (51mm)
and the seat depth 1” (25mm). The ribbed surface pro-
vides comfort and promotes airflow. Fig.158
1. To install the anti-tip tube, align the tube with the end of the round
frame tubing located next to the rear wheel. Fig.159
2. Push the spring button while positioning the anti-tip tube onto the
round frame tubing Fig.160, and push until the “release button” pops
through the hole located on the anti-tip tube. Fig.161
3. Repeat steps 1 & 2 for opposite side.
4. To remove the Anti-Tip Tubes, perform above steps in reverse order.
Fig. 157
Fig. 158
Fig. 159
Fig. 160
Fig. 161
WARNING:
If the user’s weight is less than 50 lbs (22.7
kg), the use of anti-tip tubes is recommended.
