Most changes are stored in an XML configuration file in the device’s Flash file system.
Only a few are stored differently, and the IP address is one of those. Normally, clicking
Update on any configuration page only stores that configuration information to a
temporary RAM copy of the configuration file. To make your changes other than IP
address permanent, you must select your file, select the Save XML Config File action,
and then click Execute on the File Manager page. Refer to Section 3 for more about
the File Manager.
NOTE: The BB3-6101-GW and MX-61-GW require rather minimal configuration
compared to mapping gateways. In some cases, you might not need any configuration
file at all. Refer to sections 4 and 5 as applicable for your need.
2. Connecting Gateway for the First Time
file:///C:/AAA_CSI/Literature/2021 User Guides/BB3-6101-MX-61 Use...
6 of 6
5/4/2021, 9:55 AM
